Repairing a small hole in a jumper with Laine Saint-Pierre
Protecting the environment and supporting sustainable development requires each of us to make a contribution, no matter how small. So why not start with the little things? A hole in your favourite jumper, for instance. We propose a faster, more economical, and eco-friendly solution than buying a new jumper, with an added bonus: the satisfaction of doing something practical and worthwhile. In just a few stitches, the problem will be solved!
What you will need
For this little magic trick, you’ll need:
- Laine Saint-Pierre
- an embroidery needle (round tipped)
Top tip: if you cannot find exactly the same colour of Laine Saint-Pierre as your jumper, choose a slightly darker tone; the stitches will be less visible than with a lighter tone. Alternatively, combine two strands of different colours to create a mottled effect.
Learn the technique
And now, follow the steps in the video!
Preparing the thread
- Thread an embroidery needle with approximately 40 cm of Laine Saint-Pierre.
- The thread consists of four strands; for fine jumpers, use just one strand.
Anchoring the thread
- Work on the wrong side of the jumper.
- Secure the thread by passing it twice under one or two stitches around the hole.
- Avoid making a knot to keep a smooth finish.
Weaving the thread
- Vertical stitching: slightly stretch the edges of the hole and make long vertical stitches without pulling the edges together. Make 3 to 4 stitches depending on the size of the hole.
- Horizontal stitching: weave the needle over and under the vertical stitches, alternating the direction on each row to create a grid-like structure.
- Continue until the hole is fully covered.
Finishing touches
- Check the edges and secure any loose stitches by sewing through them again.
- Turn the jumper right side out to inspect the result. If necessary, reinforce the repair by passing through a few strands again.
